Published:2015-04-18
SHIDdaemon Release : http://www.houge.com/en/index.php/news/zlxz/15
Reference Resources : http://www.openssl.org/ http://cve.mitre.org/
CVE-2015-0291: [High severity] 19th March 2015
ClientHello sigalgs DoS. If a client connects to an OpenSSL 1.0.2 server and renegotiates with an invalid signature algorithms extension a NULL pointer dereference will occur. This can be exploited in a DoS attack against the server. (original advisory). Reported by David Ramos (Stanford University).
Fixed in OpenSSL 1.0.2a (Affected 1.0.2)
CVE-2015-0290: [Moderate severity] 19th March 2015
Multiblock corrupted pointer. OpenSSL 1.0.2 introduced the "multiblock" performance improvement. This feature only applies on 64 bit x86 architecture platforms that support AES NI instructions. A defect in the implementation of "multiblock" can cause OpenSSL's internal write buffer to become incorrectly set to NULL when using non-blocking IO. Typically, when the user application is using a socket BIO for writing, this will only result in a failed connection. However if some other BIO is used then it is likely that a segmentation fault will be triggered, thus enabling a potential DoS attack. (original advisory). Reported by Daniel Danner and Rainer Mueller.
Fixed in OpenSSL 1.0.2a (Affected 1.0.2)
CVE-2015-0207: [Moderate severity] 19th March 2015
Segmentation fault in DTLSv1_listen. A defect in the implementation of DTLSv1_listen means that state is preserved in the SSL object from one invocation to the next that can lead to a segmentation fault. Errors processing the initial ClientHello can trigger this scenario. An example of such an error could be that a DTLS1.0 only client is attempting to connect to a DTLS1.2 only server. (original advisory). Reported by Per Allansson.
Fixed in OpenSSL 1.0.2a (Affected 1.0.2)
CVE-2015-0286: [Moderate severity] 19th March 2015
Segmentation fault in ASN1_TYPE_cmp. The function ASN1_TYPE_cmp will crash with an invalid read if an attempt is made to compare ASN.1 boolean types. Since ASN1_TYPE_cmp is used to check certificate signature algorithm consistency this can be used to crash any certificate verification operation and exploited in a DoS attack. Any application which performs certificate verification is vulnerable including OpenSSL clients and servers which enable client authentication. (original advisory). Reported by Stephen Henson (OpenSSL development team).
Fixed in OpenSSL 1.0.2a (Affected 1.0.2)
Fixed in OpenSSL 1.0.1m (Affected 1.0.1l, 1.0.1k, 1.0.1j, 1.0.1i, 1.0.1h, 1.0.1g, 1.0.1f, 1.0.1e, 1.0.1d, 1.0.1c, 1.0.1b, 1.0.1a, 1.0.1)
Fixed in OpenSSL 1.0.0r (Affected 1.0.0q, 1.0.0p, 1.0.0o, 1.0.0n, 1.0.0m, 1.0.0l, 1.0.0k, 1.0.0j, 1.0.0i, 1.0.0g, 1.0.0f, 1.0.0e, 1.0.0d, 1.0.0c, 1.0.0b, 1.0.0a, 1.0.0)
Fixed in OpenSSL 0.9.8zf (Affected 0.9.8ze, 0.9.8zd)
CVE-2015-0208: [Moderate severity] 19th March 2015
Segmentation fault for invalid PSS parameters. The signature verification routines will crash with a NULL pointer dereference if presented with an ASN.1 signature using the RSA PSS algorithm and invalid parameters. Since these routines are used to verify certificate signature algorithms this can be used to crash any certificate verification operation and exploited in a DoS attack. Any application which performs certificate verification is vulnerable including OpenSSL clients and servers which enable client authentication. (original advisory). Reported by Brian Carpenter.
Fixed in OpenSSL 1.0.2a (Affected 1.0.2)
CVE-2015-0287: [Moderate severity] 19th March 2015
ASN.1 structure reuse memory corruption. Reusing a structure in ASN.1 parsing may allow an attacker to cause memory corruption via an invalid write. Such reuse is and has been strongly discouraged and is believed to be rare. (original advisory). Reported by Emilia Käsper (OpenSSL development team).
Fixed in OpenSSL 1.0.2a (Affected 1.0.2)
Fixed in OpenSSL 1.0.1m (Affected 1.0.1l, 1.0.1k, 1.0.1j, 1.0.1i, 1.0.1h, 1.0.1g, 1.0.1f, 1.0.1e, 1.0.1d, 1.0.1c, 1.0.1b, 1.0.1a, 1.0.1)
Fixed in OpenSSL 1.0.0r (Affected 1.0.0q, 1.0.0p, 1.0.0o, 1.0.0n, 1.0.0m, 1.0.0l, 1.0.0k, 1.0.0j, 1.0.0i, 1.0.0g, 1.0.0f, 1.0.0e, 1.0.0d, 1.0.0c, 1.0.0b, 1.0.0a, 1.0.0)
Fixed in OpenSSL 0.9.8zf (Affected 0.9.8ze, 0.9.8zd, 0.9.8zc, 0.9.8zb, 0.9.8za, 0.9.8y, 0.9.8x, 0.9.8w, 0.9.8v, 0.9.8u, 0.9.8t, 0.9.8s, 0.9.8r, 0.9.8q, 0.9.8p, 0.9.8o, 0.9.8n, 0.9.8m, 0.9.8l, 0.9.8k, 0.9.8j, 0.9.8i, 0.9.8h, 0.9.8g, 0.9.8f, 0.9.8e, 0.9.8d, 0.9.8c, 0.9.8b, 0.9.8a, 0.9.8)
CVE-2015-0289: [Moderate severity] 19th March 2015
PKCS#7 NULL pointer dereference. The PKCS#7 parsing code does not handle missing outer ContentInfo correctly. An attacker can craft malformed ASN.1-encoded PKCS#7 blobs with missing content and trigger a NULL pointer dereference on parsing. Applications that verify PKCS#7 signatures, decrypt PKCS#7 data or otherwise parse PKCS#7 structures from untrusted sources are affected. OpenSSL clients and servers are not affected. (original advisory). Reported by Michal Zalewski (Google).
Fixed in OpenSSL 1.0.2a (Affected 1.0.2)
Fixed in OpenSSL 1.0.1m (Affected 1.0.1l, 1.0.1k, 1.0.1j, 1.0.1i, 1.0.1h, 1.0.1g, 1.0.1f, 1.0.1e, 1.0.1d, 1.0.1c, 1.0.1b, 1.0.1a, 1.0.1)
Fixed in OpenSSL 1.0.0r (Affected 1.0.0q, 1.0.0p, 1.0.0o, 1.0.0n, 1.0.0m, 1.0.0l, 1.0.0k, 1.0.0j, 1.0.0i, 1.0.0g, 1.0.0f, 1.0.0e, 1.0.0d, 1.0.0c, 1.0.0b, 1.0.0a, 1.0.0)
Fixed in OpenSSL 0.9.8zf (Affected 0.9.8ze, 0.9.8zd, 0.9.8zc, 0.9.8zb, 0.9.8za, 0.9.8y, 0.9.8x, 0.9.8w, 0.9.8v, 0.9.8u, 0.9.8t, 0.9.8s, 0.9.8r, 0.9.8q, 0.9.8p, 0.9.8o, 0.9.8n, 0.9.8m, 0.9.8l, 0.9.8k, 0.9.8j, 0.9.8i, 0.9.8h, 0.9.8g, 0.9.8f, 0.9.8e, 0.9.8d, 0.9.8c, 0.9.8b, 0.9.8a, 0.9.8)
CVE-2015-0292: [Moderate severity] 19th March 2015
A vulnerability existed in previous versions of OpenSSL related to the processing of base64 encoded data. Any code path that reads base64 data from an untrusted source could be affected (such as the PEM processing routines). Maliciously crafted base64 data could trigger a segmenation fault or memory corruption. (original advisory). Reported by Robert Dugal, also David Ramos, also Huzaifa Sidhpurwala (Red Hat).
Fixed in OpenSSL 1.0.1h (Affected 1.0.1g, 1.0.1f, 1.0.1e, 1.0.1d, 1.0.1c, 1.0.1b, 1.0.1a, 1.0.1)
Fixed in OpenSSL 1.0.0m (Affected 1.0.0l, 1.0.0k, 1.0.0j, 1.0.0i, 1.0.0g, 1.0.0f, 1.0.0e, 1.0.0d, 1.0.0c, 1.0.0b, 1.0.0a, 1.0.0)
Fixed in OpenSSL 0.9.8za (Affected 0.9.8y, 0.9.8x, 0.9.8w, 0.9.8v, 0.9.8u, 0.9.8t, 0.9.8s, 0.9.8r, 0.9.8q, 0.9.8p, 0.9.8o, 0.9.8n, 0.9.8m, 0.9.8l, 0.9.8k, 0.9.8j, 0.9.8i, 0.9.8h, 0.9.8g, 0.9.8f, 0.9.8e, 0.9.8d, 0.9.8c, 0.9.8b, 0.9.8a, 0.9.8)
CVE-2015-0293: [Moderate severity] 19th March 2015
DoS via reachable assert in SSLv2 servers. A malicious client can trigger an OPENSSL_assert in servers that both support SSLv2 and enable export cipher suites by sending a specially crafted SSLv2 CLIENT-MASTER-KEY message. (original advisory). Reported by Sean Burford (Google) and Emilia Käsper (OpenSSL development team).
Fixed in OpenSSL 1.0.2a (Affected 1.0.2)
Fixed in OpenSSL 1.0.1m (Affected 1.0.1l, 1.0.1k, 1.0.1j, 1.0.1i, 1.0.1h, 1.0.1g, 1.0.1f, 1.0.1e, 1.0.1d, 1.0.1c, 1.0.1b, 1.0.1a, 1.0.1)
Fixed in OpenSSL 1.0.0r (Affected 1.0.0q, 1.0.0p, 1.0.0o, 1.0.0n, 1.0.0m, 1.0.0l, 1.0.0k, 1.0.0j, 1.0.0i, 1.0.0g, 1.0.0f, 1.0.0e, 1.0.0d, 1.0.0c, 1.0.0b, 1.0.0a, 1.0.0)
Fixed in OpenSSL 0.9.8zf (Affected 0.9.8ze, 0.9.8zd, 0.9.8zc, 0.9.8zb, 0.9.8za, 0.9.8y, 0.9.8x, 0.9.8w, 0.9.8v, 0.9.8u, 0.9.8t, 0.9.8s, 0.9.8r, 0.9.8q, 0.9.8p, 0.9.8o, 0.9.8n, 0.9.8m, 0.9.8l, 0.9.8k, 0.9.8j, 0.9.8i, 0.9.8h, 0.9.8g, 0.9.8f, 0.9.8e, 0.9.8d, 0.9.8c, 0.9.8b, 0.9.8a, 0.9.8)
CVE-2015-1787: [Moderate severity] 19th March 2015
Empty CKE with client auth and DHE. If client auth is used then a server can seg fault in the event of a DHE ciphersuite being selected and a zero length ClientKeyExchange message being sent by the client. This could be exploited in a DoS attack. (original advisory). Reported by Matt Caswell (OpenSSL development team).
Fixed in OpenSSL 1.0.2a (Affected 1.0.2)
CVE-2015-0209: [Low severity] 19th March 2015
Use After Free following d2i_ECPrivatekey error. A malformed EC private key file consumed via the d2i_ECPrivateKey function could cause a use after free condition. This, in turn, could cause a double free in several private key parsing functions (such as d2i_PrivateKey or EVP_PKCS82PKEY) and could lead to a DoS attack or memory corruption for applications that receive EC private keys from untrusted sources. This scenario is considered rare. (original advisory). Reported by The BoringSSL project.
Fixed in OpenSSL 1.0.2a (Affected 1.0.2)
Fixed in OpenSSL 1.0.1m (Affected 1.0.1l, 1.0.1k, 1.0.1j, 1.0.1i, 1.0.1h, 1.0.1g, 1.0.1f, 1.0.1e, 1.0.1d, 1.0.1c, 1.0.1b, 1.0.1a, 1.0.1)
Fixed in OpenSSL 1.0.0r (Affected 1.0.0q, 1.0.0p, 1.0.0o, 1.0.0n, 1.0.0m, 1.0.0l, 1.0.0k, 1.0.0j, 1.0.0i, 1.0.0g, 1.0.0f, 1.0.0e, 1.0.0d, 1.0.0c, 1.0.0b, 1.0.0a, 1.0.0)
Fixed in OpenSSL 0.9.8zf (Affected 0.9.8ze, 0.9.8zd, 0.9.8zc, 0.9.8zb, 0.9.8za, 0.9.8y, 0.9.8x, 0.9.8w, 0.9.8v, 0.9.8u, 0.9.8t, 0.9.8s, 0.9.8r, 0.9.8q, 0.9.8p, 0.9.8o, 0.9.8n, 0.9.8m, 0.9.8l, 0.9.8k, 0.9.8j, 0.9.8i, 0.9.8h, 0.9.8g, 0.9.8f, 0.9.8e, 0.9.8d, 0.9.8c, 0.9.8b, 0.9.8a, 0.9.8)
CVE-2015-0285: [Low severity] 10th March 2015
Under certain conditions an OpenSSL 1.0.2 client can complete a handshake with an unseeded PRNG. If the handshake succeeds then the client random that has been used will have been generated from a PRNG with insufficient entropy and therefore the output may be predictable. (original advisory). Reported by Matt Caswell (OpenSSL development team).
Fixed in OpenSSL 1.0.2a (Affected 1.0.2)
CVE-2015-0288: [Low severity] 2nd March 2015
X509_to_X509_REQ NULL pointer deref. The function X509_to_X509_REQ will crash with a NULL pointer dereference if the certificate key is invalid. This function is rarely used in practice. (original advisory). Reported by Brian Carpenter.
Fixed in OpenSSL 1.0.2a (Affected 1.0.2)
Fixed in OpenSSL 1.0.1m (Affected 1.0.1l, 1.0.1k, 1.0.1j, 1.0.1i, 1.0.1h, 1.0.1g, 1.0.1f, 1.0.1e, 1.0.1d, 1.0.1c, 1.0.1b, 1.0.1a, 1.0.1)
Fixed in OpenSSL 1.0.0r (Affected 1.0.0q, 1.0.0p, 1.0.0o, 1.0.0n, 1.0.0m, 1.0.0l, 1.0.0k, 1.0.0j, 1.0.0i, 1.0.0g, 1.0.0f, 1.0.0e, 1.0.0d, 1.0.0c, 1.0.0b, 1.0.0a, 1.0.0)
Fixed in OpenSSL 0.9.8zf (Affected 0.9.8ze, 0.9.8zd, 0.9.8zc, 0.9.8zb, 0.9.8za, 0.9.8y, 0.9.8x, 0.9.8w, 0.9.8v, 0.9.8u, 0.9.8t, 0.9.8s, 0.9.8r, 0.9.8q, 0.9.8p, 0.9.8o, 0.9.8n, 0.9.8m, 0.9.8l, 0.9.8k, 0.9.8j, 0.9.8i, 0.9.8h, 0.9.8g, 0.9.8f, 0.9.8e, 0.9.8d, 0.9.8c, 0.9.8b, 0.9.8a, 0.9.8)
CVE-2015-0206: 8th January 2015
A memory leak can occur in the dtls1_buffer_record function under certain conditions. In particular this could occur if an attacker sent repeated DTLS records with the same sequence number but for the next epoch. The memory leak could be exploited by an attacker in a Denial of Service attack through memory exhaustion. (original advisory). Reported by Chris Mueller.
Fixed in OpenSSL 1.0.1k (Affected 1.0.1j, 1.0.1i, 1.0.1h, 1.0.1g, 1.0.1f, 1.0.1e, 1.0.1d, 1.0.1c, 1.0.1b, 1.0.1a, 1.0.1)
Fixed in OpenSSL 1.0.0p (Affected 1.0.0o, 1.0.0n, 1.0.0m, 1.0.0l, 1.0.0k, 1.0.0j, 1.0.0i, 1.0.0g, 1.0.0f, 1.0.0e, 1.0.0d, 1.0.0c, 1.0.0b, 1.0.0a, 1.0.0)
CVE-2015-0205: 8th January 2015
An OpenSSL server will accept a DH certificate for client authentication without the certificate verify message. This effectively allows a client to authenticate without the use of a private key. This only affects servers which trust a client certificate authority which issues certificates containing DH keys: these are extremely rare and hardly ever encountered. (original advisory). Reported by Karthikeyan Bhargavan of the PROSECCO team at INRIA.
Fixed in OpenSSL 1.0.1k (Affected 1.0.1j, 1.0.1i, 1.0.1h, 1.0.1g, 1.0.1f, 1.0.1e, 1.0.1d, 1.0.1c, 1.0.1b, 1.0.1a, 1.0.1)
Fixed in OpenSSL 1.0.0p (Affected 1.0.0o, 1.0.0n, 1.0.0m, 1.0.0l, 1.0.0k, 1.0.0j, 1.0.0i, 1.0.0g, 1.0.0f, 1.0.0e, 1.0.0d, 1.0.0c, 1.0.0b, 1.0.0a, 1.0.0)
CVE-2014-3570: 8th January 2015
Bignum squaring (BN_sqr) may produce incorrect results on some platforms, including x86_64. This bug occurs at random with a very low probability, and is not known to be exploitable in any way, though its exact impact is difficult to determine. The following has been determined: *) The probability of BN_sqr producing an incorrect result at random is very low: 1/2^64 on the single affected 32-bit platform (MIPS) and 1/2^128 on affected 64-bit platforms. *) On most platforms, RSA follows a different code path and RSA operations are not affected at all. For the remaining platforms (e.g. OpenSSL built without assembly support), pre-existing countermeasures thwart bug attacks [1]. *) Static ECDH is theoretically affected: it is possible to construct elliptic curve points that would falsely appear to be on the given curve. However, there is no known computationally feasible way to construct such points with low order, and so the security of static ECDH private keys is believed to be unaffected. *) Other routines known to be theoretically affected are modular exponentiation, primality testing, DSA, RSA blinding, JPAKE and SRP. No exploits are known and straightforward bug attacks fail - either the attacker cannot control when the bug triggers, or no private key material is involved. (original advisory). Reported by Pieter Wuille (Blockstream).
Fixed in OpenSSL 1.0.1k (Affected 1.0.1j, 1.0.1i, 1.0.1h, 1.0.1g, 1.0.1f, 1.0.1e, 1.0.1d, 1.0.1c, 1.0.1b, 1.0.1a, 1.0.1)
Fixed in OpenSSL 1.0.0p (Affected 1.0.0o, 1.0.0n, 1.0.0m, 1.0.0l, 1.0.0k, 1.0.0j, 1.0.0i, 1.0.0g, 1.0.0f, 1.0.0e, 1.0.0d, 1.0.0c, 1.0.0b, 1.0.0a, 1.0.0)
Fixed in OpenSSL 0.9.8zd (Affected 0.9.8zc, 0.9.8zb, 0.9.8za, 0.9.8y, 0.9.8x, 0.9.8w, 0.9.8v, 0.9.8u, 0.9.8t, 0.9.8s, 0.9.8r, 0.9.8q, 0.9.8p, 0.9.8o, 0.9.8n, 0.9.8m, 0.9.8l, 0.9.8k, 0.9.8j, 0.9.8i, 0.9.8h, 0.9.8g, 0.9.8f, 0.9.8e, 0.9.8d, 0.9.8c, 0.9.8b, 0.9.8a, 0.9.8)
CVE-2015-0204: 6th January 2015
An OpenSSL client will accept the use of an RSA temporary key in a non-export RSA key exchange ciphersuite. A server could present a weak temporary key and downgrade the security of the session. (original advisory). Reported by Karthikeyan Bhargavan of the PROSECCO team at INRIA.
Fixed in OpenSSL 1.0.1k (Affected 1.0.1j, 1.0.1i, 1.0.1h, 1.0.1g, 1.0.1f, 1.0.1e, 1.0.1d, 1.0.1c, 1.0.1b, 1.0.1a, 1.0.1)
Fixed in OpenSSL 1.0.0p (Affected 1.0.0o, 1.0.0n, 1.0.0m, 1.0.0l, 1.0.0k, 1.0.0j, 1.0.0i, 1.0.0g, 1.0.0f, 1.0.0e, 1.0.0d, 1.0.0c, 1.0.0b, 1.0.0a, 1.0.0)
Fixed in OpenSSL 0.9.8zd (Affected 0.9.8zc, 0.9.8zb, 0.9.8za, 0.9.8y, 0.9.8x, 0.9.8w, 0.9.8v, 0.9.8u, 0.9.8t, 0.9.8s, 0.9.8r, 0.9.8q, 0.9.8p, 0.9.8o, 0.9.8n, 0.9.8m, 0.9.8l, 0.9.8k, 0.9.8j, 0.9.8i, 0.9.8h, 0.9.8g, 0.9.8f, 0.9.8e, 0.9.8d, 0.9.8c, 0.9.8b, 0.9.8a, 0.9.8)
CVE-2014-3572: 5th January 2015
An OpenSSL client will accept a handshake using an ephemeral ECDH ciphersuite using an ECDSA certificate if the server key exchange message is omitted. This effectively removes forward secrecy from the ciphersuite. (original advisory). Reported by Karthikeyan Bhargavan of the PROSECCO team at INRIA.
Fixed in OpenSSL 1.0.1k (Affected 1.0.1j, 1.0.1i, 1.0.1h, 1.0.1g, 1.0.1f, 1.0.1e, 1.0.1d, 1.0.1c, 1.0.1b, 1.0.1a, 1.0.1)
Fixed in OpenSSL 1.0.0p (Affected 1.0.0o, 1.0.0n, 1.0.0m, 1.0.0l, 1.0.0k, 1.0.0j, 1.0.0i, 1.0.0g, 1.0.0f, 1.0.0e, 1.0.0d, 1.0.0c, 1.0.0b, 1.0.0a, 1.0.0)
Fixed in OpenSSL 0.9.8zd (Affected 0.9.8zc, 0.9.8zb, 0.9.8za, 0.9.8y, 0.9.8x, 0.9.8w, 0.9.8v, 0.9.8u, 0.9.8t, 0.9.8s, 0.9.8r, 0.9.8q, 0.9.8p, 0.9.8o, 0.9.8n, 0.9.8m, 0.9.8l, 0.9.8k, 0.9.8j, 0.9.8i, 0.9.8h, 0.9.8g, 0.9.8f, 0.9.8e, 0.9.8d, 0.9.8c, 0.9.8b, 0.9.8a, 0.9.8)
CVE-2014-8275: 5th January 2015
OpenSSL accepts several non-DER-variations of certificate signature algorithm and signature encodings. OpenSSL also does not enforce a match between the signature algorithm between the signed and unsigned portions of the certificate. By modifying the contents of the signature algorithm or the encoding of the signature, it is possible to change the certificate's fingerprint. This does not allow an attacker to forge certificates, and does not affect certificate verification or OpenSSL servers/clients in any other way. It also does not affect common revocation mechanisms. Only custom applications that rely on the uniqueness of the fingerprint (e.g. certificate blacklists) may be affected. (original advisory). Reported by Antti Karjalainen and Tuomo Untinen from the Codenomicon CROSS program/Konrad Kraszewski from Google.
Fixed in OpenSSL 1.0.1k (Affected 1.0.1j, 1.0.1i, 1.0.1h, 1.0.1g, 1.0.1f, 1.0.1e, 1.0.1d, 1.0.1c, 1.0.1b, 1.0.1a, 1.0.1)
Fixed in OpenSSL 1.0.0p (Affected 1.0.0o, 1.0.0n, 1.0.0m, 1.0.0l, 1.0.0k, 1.0.0j, 1.0.0i, 1.0.0g, 1.0.0f, 1.0.0e, 1.0.0d, 1.0.0c, 1.0.0b, 1.0.0a, 1.0.0)
Fixed in OpenSSL 0.9.8zd (Affected 0.9.8zc, 0.9.8zb, 0.9.8za, 0.9.8y, 0.9.8x, 0.9.8w, 0.9.8v, 0.9.8u, 0.9.8t, 0.9.8s, 0.9.8r, 0.9.8q, 0.9.8p, 0.9.8o, 0.9.8n, 0.9.8m, 0.9.8l, 0.9.8k, 0.9.8j, 0.9.8i, 0.9.8h, 0.9.8g, 0.9.8f, 0.9.8e, 0.9.8d, 0.9.8c, 0.9.8b, 0.9.8a, 0.9.8)
2014
CVE-2014-3569: 21st October 2014
When openssl is built with the no-ssl3 option and a SSL v3 ClientHello is received the ssl method would be set to NULL which could later result in a NULL pointer dereference. (original advisory). Reported by Frank Schmirler.
Fixed in OpenSSL 1.0.1k (Affected 1.0.1j, 1.0.1i, 1.0.1h, 1.0.1g, 1.0.1f, 1.0.1e, 1.0.1d, 1.0.1c, 1.0.1b, 1.0.1a, 1.0.1)
Fixed in OpenSSL 1.0.0p (Affected 1.0.0o, 1.0.0n, 1.0.0m, 1.0.0l, 1.0.0k, 1.0.0j, 1.0.0i, 1.0.0g, 1.0.0f, 1.0.0e, 1.0.0d, 1.0.0c, 1.0.0b, 1.0.0a, 1.0.0)
Fixed in OpenSSL 0.9.8zd (Affected 0.9.8zc, 0.9.8zb, 0.9.8za, 0.9.8y, 0.9.8x, 0.9.8w, 0.9.8v, 0.9.8u, 0.9.8t, 0.9.8s, 0.9.8r, 0.9.8q, 0.9.8p, 0.9.8o, 0.9.8n, 0.9.8m, 0.9.8l, 0.9.8k, 0.9.8j, 0.9.8i, 0.9.8h, 0.9.8g, 0.9.8f, 0.9.8e, 0.9.8d, 0.9.8c, 0.9.8b, 0.9.8a, 0.9.8)
CVE-2014-3513: 15th October 2014
A flaw in the DTLS SRTP extension parsing code allows an attacker, who sends a carefully crafted handshake message, to cause OpenSSL to fail to free up to 64k of memory causing a memory leak. This could be exploited in a Denial Of Service attack. This issue affects OpenSSL 1.0.1 server implementations for both SSL/TLS and DTLS regardless of whether SRTP is used or configured. Implementations of OpenSSL that have been compiled with OPENSSL_NO_SRTP defined are not affected. (original advisory). Reported by LibreSSL project.
Fixed in OpenSSL 1.0.1j (Affected 1.0.1i, 1.0.1h, 1.0.1g, 1.0.1f, 1.0.1e, 1.0.1d, 1.0.1c, 1.0.1b, 1.0.1a, 1.0.1)
CVE-2014-3567: 15th October 2014
When an OpenSSL SSL/TLS/DTLS server receives a session ticket the integrity of that ticket is first verified. In the event of a session ticket integrity check failing, OpenSSL will fail to free memory causing a memory leak. By sending a large number of invalid session tickets an attacker could exploit this issue in a Denial Of Service attack. (original advisory).
Fixed in OpenSSL 1.0.1j (Affected 1.0.1i, 1.0.1h, 1.0.1g, 1.0.1f, 1.0.1e, 1.0.1d, 1.0.1c, 1.0.1b, 1.0.1a, 1.0.1)
Fixed in OpenSSL 1.0.0o (Affected 1.0.0n, 1.0.0m, 1.0.0l, 1.0.0k, 1.0.0j, 1.0.0i, 1.0.0g, 1.0.0f, 1.0.0e, 1.0.0d, 1.0.0c, 1.0.0b, 1.0.0a, 1.0.0)
Fixed in OpenSSL 0.9.8zc (Affected 0.9.8zb, 0.9.8za, 0.9.8y, 0.9.8x, 0.9.8w, 0.9.8v, 0.9.8u, 0.9.8t, 0.9.8s, 0.9.8r, 0.9.8q, 0.9.8p, 0.9.8o, 0.9.8n, 0.9.8m, 0.9.8l, 0.9.8k, 0.9.8j, 0.9.8i, 0.9.8h, 0.9.8g)
15th October 2014
OpenSSL has added support for TLS_FALLBACK_SCSV to allow applications to block the ability for a MITM attacker to force a protocol downgrade. Some client applications (such as browsers) will reconnect using a downgraded protocol to work around interoperability bugs in older servers. This could be exploited by an active man-in-the-middle to downgrade connections to SSL 3.0 even if both sides of the connection support higher protocols. SSL 3.0 contains a number of weaknesses including POODLE (CVE-2014-3566). See also https://tools.ietf.org/html/draft-ietf-tls-downgrade-scsv-00 and https://www.openssl.org/~bodo/ssl-poodle.pdf
Fixed in OpenSSL 1.0.1j (Affected 1.0.1i, 1.0.1h, 1.0.1g, 1.0.1f, 1.0.1e, 1.0.1d, 1.0.1c, 1.0.1b, 1.0.1a, 1.0.1)
Fixed in OpenSSL 1.0.0o (Affected 1.0.0n, 1.0.0m, 1.0.0l, 1.0.0k, 1.0.0j, 1.0.0i, 1.0.0g, 1.0.0f, 1.0.0e, 1.0.0d, 1.0.0c, 1.0.0b, 1.0.0a, 1.0.0)
Fixed in OpenSSL 0.9.8zc (Affected 0.9.8zb, 0.9.8za, 0.9.8y, 0.9.8x, 0.9.8w, 0.9.8v, 0.9.8u, 0.9.8t, 0.9.8s, 0.9.8r, 0.9.8q, 0.9.8p, 0.9.8o, 0.9.8n, 0.9.8m, 0.9.8l, 0.9.8k, 0.9.8j, 0.9.8i, 0.9.8h, 0.9.8g, 0.9.8f, 0.9.8e, 0.9.8d, 0.9.8c, 0.9.8b, 0.9.8a, 0.9.8)
CVE-2014-3568: 15th October 2014
When OpenSSL is configured with "no-ssl3" as a build option, servers could accept and complete a SSL 3.0 handshake, and clients could be configured to send them. (original advisory). Reported by Akamai Technologies.
Fixed in OpenSSL 1.0.1j (Affected 1.0.1i, 1.0.1h, 1.0.1g, 1.0.1f, 1.0.1e, 1.0.1d, 1.0.1c, 1.0.1b, 1.0.1a, 1.0.1)
Fixed in OpenSSL 1.0.0o (Affected 1.0.0n, 1.0.0m, 1.0.0l, 1.0.0k, 1.0.0j, 1.0.0i, 1.0.0g, 1.0.0f, 1.0.0e, 1.0.0d, 1.0.0c, 1.0.0b, 1.0.0a, 1.0.0)
Fixed in OpenSSL 0.9.8zc (Affected 0.9.8zb, 0.9.8za, 0.9.8y, 0.9.8x, 0.9.8w, 0.9.8v, 0.9.8u, 0.9.8t, 0.9.8s, 0.9.8r, 0.9.8q, 0.9.8p, 0.9.8o, 0.9.8n, 0.9.8m, 0.9.8l, 0.9.8k, 0.9.8j, 0.9.8i, 0.9.8h, 0.9.8g, 0.9.8f, 0.9.8e, 0.9.8d, 0.9.8c, 0.9.8b, 0.9.8a, 0.9.8)
